PIXMA MG2940 Wireless Connection Installation

Some access points (sometimes known as hubs or routers ) contain a automatic connection button tagged"WPS" which stands to get wifi Protected Setup.

This enables enabled apparatus such as the PIXMA MG2940 to attach to your system without needing to enter a password and it enables a quick and effortless way of connecting your devices.

This way is absolutely the easiest method of linking your PIXMA MG2940 therefore if your access point includes a WPS button please select the'WPS Connection Method' tab under instructions on connecting using this particular method.

When your router doesn't support WPS we now have provided alternative instructions to get your PIXMA MG2940 connected so please select the'Typical Connection Method' tab below.

WPS Connection Approach 

Before we begin download latest and updated drivers from canon.com/ijsetup, there are some requirements That Have to Be fulfilled in order to utilize the WPS Pushbutton method:

The access point needs a physical WPS push-button available. Please consult your device's user guide for details.

If the WPS pushbutton is not available please utilize the instructions on the normal Link Method tab.

• ·         Many WPS allowed access points use this protocol
• ·         Be certain that the printer has been turned on.
• ·         Press and hold the [wifi ] button towards the top of the printer until the orange alarm flashes once and release it.
• ·         Be certain that the wifi button starts to flash blue and go to your access point and press the [WPS] button within 2 minutes.

For precise specifics about pressing on the WPS button, please first refer to www.canon.com/ijsetup or this access point manual.The blue Wi-Fi lamp onto the printer will continue flash while looking for, or connecting to the access point. During the setup the green power lamp will even start to flash. When the printer has successfully made a connection with a wireless system, the green and blue lamps can stop flashing and remain lit.